Checking the MAC Address

You need the MAC address of the printer to set the IP address using NetSpot Device Installer or the ARP/PING command. To confirm the MAC address, perform Network Status Print with the printer's control panel using the following procedure.
NOTE
Load Letter size paper.
The Network Status Print is designed to be printed on Letter size paper.
Be sure to load Letter size paper when printing the Network Status Print.
1
Load Letter size paper in the multi-purpose tray or paper cassette.
2
Press [ ] (Utility).
3
Select [Network Status Print] using [ ] and [ ], then press [OK].
4
Select [Yes] using [ ], then press [OK].
Network Status Print is printed. The MAC address (A) is indicated in [Ethernet Driver Setting] on the upper left of the Network Status Print.
0032-0SX