[Setup] Menu ([Control Menu] Options)

NOTE
Table description
Bold values in the table indicate the default settings.
After changing the setting items with "*", cycle the power of the printer or perform a hard reset to make the settings effective.
Setting Item
Setting Value
Setting
[Power Save Mode]
[Off], [Panel Off], [On], [Deep Sleep]
Specifies whether the printer should use Power Save Mode.
[Power Save in Error]
[Off], [On]
Specifies whether the printer should enter Power Save Mode when an error is occurring in the printer (when the Message indicator is on, or the number in the message blinks).
[Power Save Time]
[1 minute], [5 minutes], [15 minutes], [30 minutes], [60 minutes], [180 minutes]
Specifies the time interval until the printer enters Power Save Mode.
[Timer Settings]
[Wake Up Timer]
[Off], [On]
Specifies whether the printer should use the Wake Up function that releases Power Save Mode (the Panel Off mode, the Printer Power Save mode, and the Deep Sleep mode).
If [On] is specified, Power Save Mode (the Panel Off mode, the Printer Power Save mode, and the Deep Sleep mode) is released when the time specified in [Wake Up Time] has elapsed.
If [Off] is specified, the printer does not use the Wake Up function.
[Wake Up Time]
When [AM/PM] is selected in [12/24 Hour Clock]:
00:00 AM/PM to 12:00 AM to 11:59 AM/PM
When [24 Hour] is selected in [12/24 Hour Clock]:
00:00 to 12:00 to 23:59
If [Wake Up Timer] is set to [On], Power Save Mode (the Panel Off mode, the Printer Power Save mode, and the Deep Sleep mode) is released when the time specified in this item has elapsed.
[Power Save Timer]
[Off], [On]
Specifies whether the printer should enter Power Save Mode when the time specified in [Power Save Time] has elapsed.
If [On] is specified, the printer enters Power Save Mode when the time specified in [Power Save Time] has elapsed.
If [Off] is specified, the printer does not enter Power Save Mode even when the time specified in [Power Save Time] has elapsed.
[Power Save Time]
When [AM/PM] is selected in [12/24 Hour Clock]:
00:00 AM/PM to 12:00 AM to 11:59 AM/PM
When [24 Hour] is selected in [12/24 Hour Clock]:
00:00 to 12:00 to 23:59
If [Power Save Timer] is set to [On], the printer enters Power Save Mode when the time specified in this item has elapsed.
[Deep Sleep Timer]
[Off], [On]
Specifies whether the printer should enter Power Save Mode 3 (the Deep Sleep mode) when the time specified in [Deep Sleep Time] has elapsed.
If [On] is specified, the printer enters Power Save Mode 3 (the Deep Sleep mode) when the time specified in [Deep Sleep Time] has elapsed.
If [Off] is specified, the printer does not enter Power Save Mode 3 (the Deep Sleep mode) even when the time specified in [Deep Sleep Time] has elapsed.
[Deep Sleep Time]
When [AM/PM] is selected in [12/24 Hour Clock]:
00:00 AM/PM to 12:00 AM to 11:59 AM/PM
When [24 Hour] is selected in [12/24 Hour Clock]:
00:00 to 12:00 to 23:59
If [Deep Sleep Timer] is set to [On], the printer enters Power Save Mode 3 (the Deep Sleep mode) when the time specified in this item has elapsed.
[Warning Step]
[Check Toner]
[Continue Printing], [Stop Printing]
Specifies whether the printer should continue or stop printing when <16 Prepare toner. Replacement not needed> appears.
[Auto Error Skip]
[Off], [On]
Specifies whether the printer should automatically use the function that, when an error is occurring, releases the printer from the error temporarily (Error Skip) and continues the job.
[Panel Language]
[Deutsch], [English], [Español], [Français], [Italiano], [中文(简体)], [한국어]
Specifies the language to be displayed in the display.
[Alarm]
[Off], [On]
Specifies an alarm sound for when an error occurs.
[Show Warnings]
[Check Toner]
[Off], [On]
Specifies whether the printer should display <16 Prepare toner. Replacement not needed> when the toner cartridge needs to be replaced soon.
[Cassette Empty]
[Off], [On]
Specifies whether the printer should blink the Paper Source indicator for the paper cassette that ran out of paper.
[Date and Time]
[Date Settings]/[Time Settings]
[Date Settings]: 01/01/2001 to 12/31/2089
[Timer Settings]:
When [AM/PM] is selected in [12/24 Hour Clock]:
00:00:00 AM/PM to 12:00:00 AM to 11:59:59 AM/PM
When [24 Hour] is selected in [12/24 Hour Clock]:
00:00:00 to 12:00 to 23:59:59
Specify date or time when the clock is not keeping correct date or time.
Increases/decreases number: [  ] [  ]
Moves to a desired setting: [  ] [ ]
Determines the entered date or time: [OK]
If you do not change the date or time, press [ ] (Online).
[12/24 Hour Clock]
[AM/PM], [24 Hour]
Specify this item if you want to change the time display to the 12-hour display or 24-hour display.
[Daylight Saving Time]*
[DST Settings]
[Off], [On]
Specifies whether to set the daylight saving time.
[Start Date and Time]/[End Date and Time]
[Month], [Week], [Day], [Time Settings]
Specifies the time duration of the daylight saving time.
[Time Zone]*
GMT-12:00 to GMT+12:00
Specifies the time zone according to the region where the printer is being used.
[PDL Select (PnP)]*
[UFR. II], [PCL5E], [PCL6], [PS3]
If you want to connect the printer and computer with a USB cable
The printer driver for this printer may be installed automatically when the USB cable is connected.
You can select the type of the printer driver ("UFR II", "PCL5e", or "PCL6") to be installed in this item at the time.
If you want to connect the printer and computer with a LAN cable
If you are using Windows Vista, you can detect the printer automatically using the WSD (Web Service on Devices) protocol.
You can select the type of the printer driver ("UFR II", "PCL5e", or "PCL6") to be installed on the automatically detected printer in this item.
[Adjust Screen]
[Contrast]
-3 to 0 to +3
If the display is not clear, adjust the contrast or brightness to the desired level.
[Backlight Brightness]
[Off], [Level 1], [Level 2], [Level 3]
[Animated Instruction]
[Off], [On]
Specifies whether the printer should display an animated picture in the display when a paper jam occurs or when a toner cartridge is replaced.
[Show Toner Gauge]
[Off], [On]
Specifies whether the printer should display the icon that indicates the toner remaining.
[Set. completed notif.]
[Off], [1 second], [2 seconds], [3 seconds]
Specifies the display time of messages that are displayed when the setting completes. If [Off] is specified, no setting completion message is displayed.
0032-0WR