Specifying the Device Name or Administrator Information

This section describes the procedure for specifying the settings using the Remote UI.
In the Remote UI, you can specify the settings by accessing the printer from a Web browser via a network.
NOTE
When specifying the settings using software other than the Remote UI
You can also specify the settings using the following software.
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
You can specify the settings using the Canon software, NetSpot Device Installer, in the supplied CD-ROM.
1
Start the Remote UI, and then log in as Administrator.
2
Select [Information] from the [Device Manager] menu.
3
Click [Change] under [Device Information].
4
Specify the device name or administrator information.
(1)
Specify the settings for each option as needed.
(2)
Click [OK].
[Device Name]
Enter the printer name.
[Location]
Enter the location to install the printer.
[Administrator]
Enter the name of the printer administrator.
[Phone]
Enter the telephone number of the printer administrator.
[Comments]
Enter the comments of the printer administrator.
0032-0XJ