Specifying the Setting for Job Log Display
You can specify the setting for Job Log Display using a Web browser (Remote UI).
1
Start the Remote UI, and then log in as Administrator.
2
Select [Information] from the [Device Manager] menu.
3
Click [Change] under [Job Log Display].
4
Specify whether the printer should display the job logs.
If the [Job Log Display] check box is selected, you can display the job logs*.
If the [Job Log Display] check box is cleared, the job logs* are not displayed.
|
*
|
The [Print Log] page in the [Job Manager] menu
|
5
Select whether to permit management software to obtain job logs.
If the [Obtain Job Log from Management Software] check box is selected, you can obtain the job logs from management software*.
If the [Obtain Job Log from Management Software] check box is cleared, job logs cannot be obtained from management software*.
|
*
|
Such as imageWARE Accounting Manager
|
|
NOTE
|
If the [Job Log Display] check box is selectedBecause only the job logs cannot be displayed, the [Obtain Job Log from Management Software] check box is automatically selected.
|
6
Click [OK].