Cleaning the Inside of the Printer

If the printed paper has smudge marks, clean the fixing roller using the following procedure.
Letter size plain paper is required to clean the fixing roller. Have Letter size plain paper ready.
1
Load Letter size plain paper in the multi-purpose tray.   
"Paper Loading and Output"
2
Make sure that the printer is online (the Online indicator is on).
If the Online indicator is off, press [  ] (Online).
3
Press [  ] (Utility).
4
Select [Cleaning] using [  ] and [  ], then press [OK].
5
Select [A4] or [LTR] using [  ] and [  ],  then press [OK].
6
Select [Yes] using [  ], and then press [OK].
<Set paper for cleaning page.> appears in the display.
7
Press [  ] (Online).
→
The cleaning paper is printed.
<Set cleaning paper and press the Online key.> appears in the display.
Next, clean the fixing roller using the printed cleaning page.
8
If any paper is loaded in the multi-purpose tray, remove it.  
9
Load the cleaning page with the printed side facing up and the arrow mark going into the multi-purpose tray first.
10
Press [  ] (Online).
→
The paper is fed into the printer slowly, and the printer starts cleaning the fixing roller.
NOTE
Cleaning time
It takes approximately 80 seconds.
Cleaning the fixing roller cannot be canceled. Please wait until it is completed.
(The cleaning is finished when the paper is output completely.)
The front or back of the printed paper has smudge marks even after performing the above procedure.
Perform the cleaning again. When doing so, do not use the cleaning paper output in Step 7 above but load Letter size blank paper in the multi-purpose tray, and then perform the cleaning.
0032-0HX