Changing the Remote UI Settings

Specify whether the SSL encrypted communication function should be used for the Remote UI.
1
Start the Remote UI, and then log in as Administrator.
2
Select [Information] from the [Device Manager] menu.
3
Click [Change] under [Remote UI].
4
Change the Remote UI settings.
(1)
Select whether to use the SSL encrypted communication function.
If [On] is selected, the SSL encrypted communication function is used.
If [Off] is selected, the SSL encrypted communication function is not used.
(2)
Click [OK].
IMPORTANT
If you cannot set [SSL] to [On]
Even if a key and its certificate have been created, you cannot set [SSL] to [On] when the key is not registered as the default key.
For details on the SSL encrypted communication function and the procedure for registering a key, see "Creating/Registering/Changing a Key and Its Certificate ."
 5
Perform a hard reset or restart the printer.
After performing a hard reset or restarting the printer, the settings are effective.
NOTE
To perform a hard reset
You can perform a hard reset using the following procedure.
1.
Select [Status] from the [Device Manager] menu.
2.
Click [Device Control].
3.
Select [Hard Reset], then click [Execute].
0032-0Y8