Setting the Administrator Password

Only the administrator (user who knows the password) can configure the settings or perform the operations related to the printer management by setting the administrator password.
Also, the administrator password can be changed anytime.
This section describes the procedure for specifying the settings using the Remote UI.
In the Remote UI, you can specify the settings by accessing the printer from a Web browser via a network.
NOTE
When specifying the settings using software other than the Remote UI
You can also specify the settings using the following software.
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
You can specify the settings using the Canon software, NetSpot Device Installer, in the supplied CD-ROM.
1
Start the Remote UI, and then log in as Administrator.
2
Select [Information] from the [Device Manager] menu.
3
Click [Change] under [Administrator Settings].
4
Set the administrator password.
(1)
Set the administrator password.
(2)
Click [OK].
[Current Password]
Enter the password currently being used.
If you set the administrator password for the first time, you do not need to enter the password.
[New Password]
Enter a new desired password.
[Confirm]
To confirm the password, enter the entered [New Password] again.
0038-09F