A Portion of the Page Is Not Printed

Perform one of the following solutions according to the cause.

<Cause 1> The setting for the scaling factor is not appropriate.

Solution 1
Perform the following procedure in the printer driver.
1.
Display the [Page Setup] sheet.
2.
Clear the [Manual Scaling] check box.
If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size] and [Output Size] automatically.
Solution 2
Perform the following procedure in the printer driver.
1.
Display the [Page Setup] sheet.
2.
Select the [Manual Scaling] check box, then specify an appropriate scale factor according to the paper size to be used.

<Cause 2> The position of the paper is incorrect.

Solution
Load the paper properly.
"Loading Paper in the Paper Cassette"
"Loading Paper in the Multi-purpose Tray"

<Cause 3> A document with no margins was printed.

Solution 1
Secure a margin around the data so that it fits within "Printable Area", then print again.
Solution 2
Perform the following procedure if you are using the printer driver.
UFR II Printer Driver
1.
Click [Advanced Settings] in the [Finishing] sheet.
2.
Set [Expand Print Region and Print] to [On].
PCL Printer Driver
1.
Click [Advanced Settings] in the [Finishing] sheet.
2.
Set [Expand Print Region and Print] to [On].
PS Printer Driver
See Help of the PS printer driver.
The edges of the printout may be partly missing depending on the property of the document to be printed.
0038-0E4