When SSL Is Enabled, the Remote UI Does Not Start, or the IPP Printing Cannot Be Performed

Perform the following procedure.

<Cause> The file related to key management is broken.

Solution
Perform the following procedure.
1.
Select [Std Network Menu] → [Remote UI Settings] → [SSL] using the control panel, and then make sure that [SSL] is set to [Off].
2.
Restart the printer.
3.
Regenerate the key and certificate and specify the settings for SSL from the Remote UI.
"Setting "a Key and Its Certificate" to Be Used for the SSL Encrypted Communication Function"
4.
Restart the printer.
0038-0EL