2-sided Printing

Two-sided printing prints a document on both sides of the paper.

Paper Type	Paper Size
Plain paper (60 to 90 g/m2) Heavy paper (91 to 120 g/m2)	Standard size: A4, Legal, Letter Custom size: 105.0 to 215.9 mm wide and 279.4 to 355.6 mm long

Before performing 2-sided printing, see "Attention (2-sided Printing)."

IMPORTANT

Precautions when performing 2-sided printing

Do not touch the paper during 2-sided printing until it is output completely. The paper is first output partially after the front side is printed, and then it is fed again to be printed on the reverse side.

Be sure to close the output selection cover before performing 2-sided printing.

"Paper Loading and Output"

Printing on the reverse side of paper that was previously printed (Performing 2-sided printing manually)

Using the multi-purpose tray, this printer enables you to perform 2-sided printing manually by inserting the reverse side of the paper* that was previously printed.

When printing on the reverse side of paper that was previously printed, flatten the curl and load one sheet of paper at a time in the multi-purpose tray.

*	You can use only paper printed by this printer. Also, you cannot print on the printed side again.

Display the [Finishing] sheet.

For instructions on how to display the printer driver screen see "Printing with the Printer Driver" or "Configuring the Print Settings Beforehand."

Select [2-sided Printing] from [Print Style].

Select the binding edge from [Binding Location].

The output image is displayed in the preview area (see "Common Functions").

Click [OK].

Note
The page sizes for which two-sided printing is available differ according to printer model. For details, view the online help. (See "Viewing the Online Help.") The display may differ according to the operating system, as well as the type and version of the printer driver.