Poster Printing

You can enlarge a one-page image and print it over multiple pages. You can then glue the printed pages together to create a poster.

Display the [Page Setup] sheet.

For instructions on how to display the printer driver screen see "Printing with the Printer Driver" or "Configuring the Print Settings Beforehand."

Select [Poster [N x N]] (N = 2, 3, or 4) from [Page Layout].

The output image is displayed in the preview area (see "Common Functions").

Note
If the options are not displayed for [Page Layout], display the [Device Settings] sheet, then select [Auto] or [Enabled] from [Spooling at Host].

Click [OK].

Note
When outputting the pages face up, the print sequence for the pages (the sheets into which the image is divided) starts from the top left proceeds to the right. When outputting the pages face down, the sequence starts from the bottom right and proceeds to the left. Poster printing cannot be used together with "Watermark Printing", "Scaling Documents", or "Printing Multiple Pages on One Sheet". The display may differ according to the operating system, as well as the type and version of the printer driver.

Note

When outputting the pages face up, the print sequence for the pages (the sheets into which the image is divided) starts from the top left proceeds to the right. When outputting the pages face down, the sequence starts from the bottom right and proceeds to the left.

Poster printing cannot be used together with "Watermark Printing", "Scaling Documents", or "Printing Multiple Pages on One Sheet".

The display may differ according to the operating system, as well as the type and version of the printer driver.