Introduction of the Optional Accessories

The following optional accessories are available to make full use of the printer functions.
For the optional accessories, contact your local authorized Canon dealer.

Paper Feeder

You can load up to 500 sheets of plain paper (75 g/m2) of the following sizes in the paper feeder.
Standard sizes
A4, B5, A5, A6, Legal, Letter, Executive, Statement, Foolscap, and 16K
Custom paper sizes
Width 105.0 to 215.9 mm, Length 148.0 to 355.6 mm*
*
If you are using the UFR II printer driver, you can load custom size paper that is 148.0 to 215.9 mm wide and 148.0 to 215.9 mm long also in landscape orientation.
          Paper Feeder Unit PF-45
IMPORTANT
Use a paper feeder designed for this printer.
Be sure to use a paper feeder designed for this printer.
NOTE
How to install the paper feeder
"Installing the Paper Feeder"
The number of installable paper feeders
You can install up to two paper feeders.

Expansion RAM

Expansion RAM is an extended memory that expands the amount of memory. This printer comes with 128 MB of memory.
One expansion RAM module can be added, and the memory capacity can be expanded up to a maximum of 384 MB.
Total RAM Capacity (Expanded RAM Capacity)
Guaranteed Paper Size for Printing
128 (Standard)
A4
192 (+64 MB)
A4 x 8
256 (+128 MB)
A4 x 16
384 (+256 MB)
A4 x 24
(+ XX MB) in the table indicates the capacity of the optional expansion RAM that is required in addition to the standard RAM.
The values in the Guaranteed Paper Size for Printing column in the table are those for when printing using the following settings.
[Gradation Level]: [Standard]
1-sided printing
The paper size is based on the A or B series paper sizes.
The following paper sizes are arranged in order of square measure from the largest to the smallest.
Legal > Foolscap > A4 > Letter > 16K > Executive > B5 > Envelope ISO-B5 > Envelope ISO-C5 > A5 > Statement > Envelope COM-10 > Envelope DL > Envelope Monarch > A6 > Index Card
The guaranteed paper sizes for printing vary depending on the settings for [Gradation Level] and [2-Sided Printing] on printing. Calculate the sizes based on the paper sizes in the table above.
Setting
Setting Value
Scale Factor
Gradation Level
Standard
100%
High
50%
2-Sided Printing
Off
100%
On
50%
IMPORTANT
About the compatible expansion RAM module
Be sure to use a 3.3 V SDRAM DIMM compatible with this printer.
We recommend that you should use Canon Expansion RAM (ER-64, ER-128, or ER-256).
Additionally, the expansion RAM module that can be installed in this printer is shaped as follows.
NOTE
The expansion RAM module is required in the following case.
When processing a large amount of registration data such as overlaid data
How to install the expansion RAM module
"Installing RAM/ROM"

PS ROM

By installing PS ROM, "PostScript 3 Emulation" which makes it possible to print with PostScript is available.
IMPORTANT
If you install PS ROM
Install another expansion RAM module, and then be sure to use PS ROM A-45 designed for this printer.
NOTE
How to install PS ROM
"Installing RAM/ROM"

PS/Barcode ROM

By installing PS/Barcode ROM, the following bar code fonts are also available as well as the functions of PS ROM.
OCR-B
Symb. FontInform
Symbole stethos
BarDIMM ©1997
USPS ZEBRA+4Stat
IMPORTANT
If you install PS/Barcode ROM
Install another expansion RAM module, and then be sure to use PS/Barcode ROM A-45 designed for this printer.
NOTE
How to install PS/Barcode ROM A-45
"Installing RAM/ROM"
0037-012