Turning the Printer ON/OFF
This section describes the procedures for turning the printer ON/OFF and checking the printer operation.
|
Before printing, see "Attention (Turning the Printer ON/OFF)."
|
Turning ON the Printer
To use this printer, press the power switch to turn the printer ON. After checking the status of the printer unit and optional accessories, the printer is ready to print.
1
Press the power switch to turn the printer ON.
|
|
The indicators and display on the control panel come on, and the printer initiates a self-diagnostic test on the printer unit and optional accessories.
|
|
If no abnormality is found during the self-diagnostic test, the Main Power indicator (green),
|
|
|
|
|
|
The following information is displayed in the display.
|
|
|
|
|
Turning OFF the Printer
1
Check that the printer is not performing the following operations.
Printing
While the printer is running a self-diagnostic test immediately after turning the power ON
While the ![]()
Job indicator is on or blinking
When any of the following messages appears
<Starting up...>
<Initializing NVRAM>
2
Press [ ![]()
] (![]()
Reset).
3
Select [Shut Down] using [ ![]()
], and then press [OK].
|
NOTE
|
When you are using WSD printingThe shutdown notifies the computer that the printer is turned OFF.
|
4
Select [Yes] using [ ![]()
], and then press [OK].
|
→
|
The process to turn the printer OFF is performed, and the messages <Executing...> and <Shutting down... Wait for prompt to cut main power.> appear.
|
|
NOTE
|
If the message <Cooling...cannot execute. Retry after cooling is complete. (10 minutes max.)> appears on the control panelThe printer is cooling down the inside. Please wait a moment.
|
5
Confirm the message.
When the printer is ready to be turned OFF, the message appears.
6
Press the power switch to turn the printer OFF.