Checking the MAC Address
You need the MAC address of the printer to set the IP address using NetSpot Device Installer or the ARP/PING command. To confirm the MAC address, perform Network Status Print with the printer's control panel using the following procedure.
|
NOTE
|
Load A4 paper.The Network Status Print is designed to be printed on A4 paper.
Be sure to load A4 paper when printing the Network Status Print.
|
1
Load A4 paper in the multi-purpose tray or paper cassette.
2
Press [ ![]()
] (![]()
Utility).
3
Select [Network Status Print] using [ ![]()
] and [ ![]()
], then press [OK].
4
Select [Yes] using [ ![]()
], then press [OK].
|
|
Network Status Print is printed. The MAC address (A) is indicated in [Ethernet Driver Setting] on the upper left of the Network Status Print.
|