Printing the PS/EPS File Using the Direct Print Function

Start the Remote UI.

"Starting the Remote UI"

Select [PS File] from the [Direct Print] menu.

Specify [Select PS/EPS File].

Click [Browse...], select the file, and click [Open...].

Specify the setting for [Color Settings].

[Color Mode]

Specify color printing or B&W printing.

[Auto (Color/Black and White)]:	It automatically switches between color and black and white printing depending on the type of document.
[Black and White]:	Even color documents are printed in black (Bk) only.

Specify the settings for [Print Settings] as the following, as needed.

[Copies]	Specify the number of copies to be printed.
[Print 2-Sided]	Specify 1-sided or 2-sided printing.
[Binding Location]	Select the binding location from [Short Edge] and [Long Edge].
[Store in Box]	When storing it in a box, check the [Store in Box] check box before selecting the box where you want to store it.

Click [Start Printing].

Do not keep clicking [Start Printing] while the file is transferring. Sometimes it takes time to transfer a file, but if you keep clicking during the transfer, a file failure may occur and it may be impossible to transfer it.

→	When the print job has finished sending, the display switches and the following message is displayed.
	Press [To Job List] to check the print job that was sent.