A Portion of the Page Is Not Printed

<Cause 1> The setting for the scaling factor is not appropriate.

Solution 1	Perform the following procedure in the printer driver. 1. Display the [Page Setup] sheet. 2. Clear the [Manual Scaling] check box. If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size] and [Output Size] automatically.
Solution 2	Perform the following procedure in the printer driver. 1. Display the [Page Setup] sheet. 2. Select the [Manual Scaling] check box, then specify an appropriate scale factor according to the paper size to be used.

<Cause 2> Paper is not loaded properly in the paper drawer or multi-purpose tray.

<Cause 3> A document with no margins was printed.

Solution 1	Data is printed with a margin of 5 mm (10 mm for envelopes). Provide a margin around the data. "Printable Area"
Solution 2	Perform the following procedure in the printer driver. 1. Display the [Finishing] sheet. 2. Click [Advanced Settings]. 3. Set [Expand Print Region and Print] to [On]. Depending on the print data to be printed, the edge of paper may be missing partly during printing or may blot during color printing.