Installing the Printer

If you want to use the printer with optional accessories installed, install them before installing the printer.

Carrying the Printer to the Installation Site

1
Pull out the paper drawer.
2
Carry the printer unit to the installation site.
After confirming that the covers and trays are closed, carry the printer by holding it by the lift handles from the front side.
3
Insert the paper drawer in the printer.
Push it in the printer firmly.

Connecting the Power Cord

1
Connect the power cord.
NOTE
The form of the supplied power cord
The form of the supplied power cord may differ from the one in the above illustration.
2
Press the power switch to turn the printer ON.
The indicators and display on the control panel come on, and the printer initiates a self-diagnostic test on the printer unit and optional accessories.
If no abnormality is found during the self-diagnostic test, the Main Power indicator (green), Ready indicator (green), Online indicator (green) and Paper Source indicator (green) come on, <Ready to print.> appears in the display, and the printer is ready to print.
The following information is displayed in the display.
Next, perform the following procedures.
1
Specifying the printer's initial settings
Specifying a type of printer driver
2
Load paper.
3
Connecting to a computer
4
Install the printer driver.
5
Check the printing operation.
Check the operations by Test Page in Windows.
051K-025