Printing on Envelopes

This printer can use the following envelopes.

Using the following types of envelopes may result in paper jams that are difficult to clear or may result in damage to the printer.

Envelopes with fasteners or snaps

Envelopes with address windows

Envelopes with adhesive on the surface

Wrinkled or creased envelopes

Poorly manufactured envelopes in which the glued parts are uneven

Irregularly-shaped envelopes

You can load envelopes only in the multi-purpose tray.

Load envelopes in the correct orientation as follows.

(

: Feeding direction)

Before loading envelopes, align them as follows.

	1.	Place the stack of envelopes on a flat surface, and then flatten them to release any remaining air. Then, press the edges tightly.		2.	Loosen any stiff corners of the envelopes and flatten curls as shown in the figure.		3.	Align the edges of the envelopes on a flat surface.

After loading envelopes, perform printing.

		Do not print on the reverse side (glued side) of envelopes.
		The print speed drops when printing on envelopes.
		When envelopes are printed, they may be creased.

If the output envelopes curl

Switch the output tray to the sub-output tray.