Checking the ROM Installation
After installing a ROM module, print Configuration Page to check if the module is installed properly.
NOTE
|
Load Letter size paper.
Configuration Page is designed to be printed on Letter size paper. Be sure to load Letter size paper when printing the Configuration Page.
|
1
Load Letter size paper in the multi-purpose tray or paper drawer.
2
Make sure that the printer is online.
If the printer is not online, press [
] (
Online).
3
Press [
] (
Utility).
4
Select [Configuration Page] using [
] and [
], and then press [OK].
5
Select [Yes] using [
], and then press [OK] to print Configuration Page.
NOTE
|
How to check the installation
PS ROM Confirm that [PS] is displayed in [Controller].
Bar DIMM Confirm that [BarDIMM] is displayed in [PCL].
→
|
If [PS] or [BarDIMM] is not displayed, see " Removing ROM," remove the ROM module, and then try to install it again.
|
|
This is a sample of Configuration Page. The contents may differ from the Configuration Page printed by your printer.
|
|