Saving a Document in the SD Card in the Printer (Stored Job Print) 

You can save print jobs in the SD card (box) in the printer by selecting [Store] from the printer driver for this printer.
In addition, stored jobs can perform the following operations from the printer's control panel and the Remote UI.

 Performing a Stored Job Print Using the Control Panel of the Printer

You can print data by selecting the saved box or job.

 Displaying or Operating the Jobs Stored in a Box (Resume/Delete)

You can check or operate the jobs stored in a box. You can perform operations of Resume (Print) and Delete. You can also check the jobs in detail. This operation is performed from the Remote UI.

 Changing the Box Settings

You can change the name of the box in which data is saved or password. This operation is performed from the Remote UI.
NOTE
About stored jobs
The stored jobs can be displayed or operated only when the SD card is installed, and [SD Card] is set to [On]. For details on the settings for [SD Card], see "[Setup] Menu ([Control Menu] Options)."
The saved jobs are saved on the SD card even after printing, and they are not deleted even after turning the printer OFF. When you want to delete the saved jobs, use the Remote UI.
Up to the total of 100 jobs in all the boxes can be saved.
You can change the name of the stored job in the printer driver before printing.
When the amount of data or number of jobs that you can save on the SD card exceeds the limit
The message <Cannot store.> is displayed. When the message is displayed, perform the following procedure.
(1)
Press [  ] (Online) to skip the error. (The job for which the error was skipped will be deleted.)
(2)
Delete any unnecessary jobs from among the jobs saved on the SD card.
(3)
Save the jobs again.
Operating the Remote UI
051S-070