Control Panel Setting
This section describes the menu operation for this printer.
Procedure for the Menu Operation
The menu consists of three hierarchies: "Option", "Item", and "Setting Value." Select the target options in each hierarchy.
As an example of the setting procedure, this section describes the procedure for setting [Drawer 1 Size] in the [Paper Source] to [B5]. Start the key operation from Step 1.
|
Before specifying the setting, see "Attention (Control Panel Setting)."
|
Operation Procedure |
Key Operation
|
|
|
1
|
Place the printer offline.
|
Press [
 ] ( Online). |
|
When the printer is online, the [Setup] menu can be displayed, however, the [User Maintenance] options cannot be specified.
|
||
|
2
|
Display the [Setup] menu.
 |
Press [
 ] ( Settings). |
|
The [Setup] menu is displayed.
|
||
|
3
|
Select the option.
When the [Paper Source] options are selected
 |
Press [
 ] or [  ]. |
|
The target option is displayed.
|
||
|
4
|
Display the item.
 |
Press [OK].
|
|
The selected item is displayed.
|
||
|
5
|
Select the item.
When [Drawer 1 Size] is selected
 |
Press [
] or [ ]. |
|
The target item is displayed.
|
||
|
6
|
Select the item.
 |
Press [OK].
|
|
The selected setting value is displayed.
|
||
|
7
|
Select the setting value.
When [B5] is selected
 |
Press [
] or [ ]. |
|
The target setting value is displayed.
|
||
|
8
|
Determine the selected setting value.
 |
Press [OK].
|
|
The target setting value is specified.
The setting completion screen is displayed for 3 seconds. You can change the display time for the screen using [Set. Comp. Notify] in the [Setup] menu. |
||
|
9
|
Go out of the setting menu.
|
Press [
] (Online). |
Printer Status to Enter the Menu Operation
You can enter each menu when the printer is in the following status.
: You can enter the menu
: You cannot enter the menu
 |
When the printer is ready to print *1
|
When an error is occurring *2
|
|
|
When the printer is online
|
When the printer is offline
|
||
|
[Setup] Menu
|
*3 |
|
|
|
[Select Feeder] Menu
|
|
|
|
|
[Reset] Menu
|
|
|
*4 |
|
[Job] Menu
|
|
|
|
|
[Utility Menu] Menu
|
|
|
|
|
*1
|
The printer is ready to print when the
 Ready indicator is on. |
|
*2
|
An error is occurring in the printer when the
 Message indicator is on. |
|
*3
|
The [User Maintenance] options cannot be specified.
|
|
*4
|
You cannot perform [Form Feed].
|