Enabling IPSec Encryption Communication

1
Click [Edit...] on the [IPSec Settings] page.
2
Select the [Use IPSec] check box.
In order to allow receipt of non-policy packets, select the [Allow Receive Non-Policy Packets] check box.
3
Perform a hard reset or restart the printer.
After performing a hard reset or restarting the printer, the settings are effective.
NOTE
To perform a hard reset
You can perform a hard reset using the following procedure.
1.
Click [Settings/Registration].
2.
Select [Device Control] from the [Output/Control] menu.
3.
Select [Hard Reset], and then click [Execute].
051S-0ES