Installing the Printer
If you want to use the printer with the optional paper feeder installed, place it at the installation site before installing the printer.
"Installing the Paper Feeder"

Carrying the Printer to the Installation Site

1
Pull out the paper cassette.
2
Carry the printer unit to the installation site.
After confirming that the covers and trays are closed, carry the printer by holding it by the lift handles from the front side.
3
Insert the paper cassette into the printer.
Push it into the printer firmly.

Connecting the Power Cord

1
Make sure that the printer is OFF.
2
Connect the power cord.
NOTE
The form of the supplied power cord
The form of the supplied power cord may differ from the one in the above illustration.
Next, perform the following procedures.
1
Load paper.
"Loading Paper in the Paper Cassette"
"Loading Paper in the Multi-purpose Tray"
2
Install the printer driver.
"Installing the Printer Driver"
3
Register a paper size.
"Registering the Paper Size"
4
Check the printing operation.
Check the operations by Configuration Page Print.
"Checking the Printer Settings"
00AU-022