Printing with a Gutter

You can specify a gutter of 0 to 2.00 in. (0 to 50 mm) for the paper to be printed.
1
Display the setting screen of the printer driver.
2
Specify the setting for [Binding Location].
(1)
Display the [Finishing] sheet.
(2)
Select an edge on which the gutter is to be located.
NOTE
Using Preview to specify the setting
You can also specify the gutter by clicking an edge of the document image on Preview when [ ] is selected.
3
Specify the setting for [Gutter].
(1)
Click [Gutter].
(2)
Specify the gutter width.
(3)
Click [OK]. Then, the [Finishing] sheet reappears.
 If you cannot specify the setting
4
Click [OK].
For details on the basic printing procedure, see "Basic Printing Procedure."
0KLS-049