Solution
|
Perform the following procedure in the printer driver.
Normally, select [Mode 1] for [Special Smoothing Mode].
If the following conditions occur when [Mode 1] is selected, select any setting between [Mode 2] and [Mode 6].
When the inside of dense graphics, large characters, or thick lines are not printed smoothly
If the following problems occur at the same time
The inside of dense graphics, large characters, or thick lines are not printed smoothly.
Outlines of light graphics, characters, and lines are not printed smoothly.
Characters and lines against a filled background are not printed smoothly.
When outlines of light graphics, characters, and lines are not printed smoothly
When strip-shaped unevenness appears on images (photographic images), graphics, gradations, and shaded patterns
When the entire document is not printed smoothly
|