Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.

NOTE
When Department ID Management is enabled (Setting the Department ID Management), this setting is not required.

Start the Remote UI and log on in System Manager Mode. Starting Remote UI

Click [Settings/Registration].

Click [Security Settings]

[Remote UI Settings].

Click [Edit].

Select the [Use Remote UI Access PIN] check box and set the PIN.

[Use Remote UI Access PIN]

If you select this check box, you must enter a PIN to access the Remote UI.

[Set/Change PIN]

To set a PIN, select the check box and enter a number of up to seven digits both in the [PIN] and [Confirm] text boxes.

Click [OK].

NOTE
If PIN is forgotten Set a new Remote UI Access PIN in the settings menu on the operation panel. Perform the following operation on the machine: <Menu> <System Management Settings> <Remote UI Settings> <Remote UI Access Security Settings> <On> Enter PIN Apply Enter PIN (Confirm) Apply. If Remote UI settings are initialized The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu

NOTE

Set a new Remote UI Access PIN in the settings menu on the operation panel. Perform the following operation on the machine: <Menu>

<On>

Enter PIN

Apply

Enter PIN (Confirm)

Apply.

The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu