Setting Sleep Mode
The sleep mode function reduces the amount of power consumed by the machine by temporarily stopping some internal operations. You can set up the machine to enter sleep mode automatically when it remains idle for a certain length of time. The factory default setting for the amount of time that elapses before the machine enters sleep mode is 1 minute. We recommend using the factory default setting to save the most power. If you want to change the amount of time that elapses before the machine enters sleep mode, follow the procedure below in the Printer Status Window.
|
|
Situations in which the machine does not enter sleep modeThe machine does not enter sleep mode when it is receiving print data from a computer, when a cover is open, when a toner cartridge is not loaded, and in some other situations.
Depending on your environment, the machine may not enter sleep mode when it is connected to a wireless LAN network.
|
1
Select the machine by clicking 
in the system tray.
in the system tray.
2
Select [Options] 
[Device Settings] [Sleep Settings].
[Device Settings] [Sleep Settings].
3
Make sleep mode settings, and click [OK].
[Auto Sleep after Fixed Period]
Select the check box to enter sleep mode after the time specified with [Enter Auto Sleep After].
Select the check box to enter sleep mode after the time specified with [Enter Auto Sleep After].
[Enter Auto Sleep After]
Specify the length of time after which the machine enters sleep mode. You can select from 1 to 180 minutes.
Specify the length of time after which the machine enters sleep mode. You can select from 1 to 180 minutes.