Loading Paper

This section explains how to load paper into the multi-purpose tray. See Paper for information about available paper sizes.
Paper Type and Printer Driver Paper Settings
Before printing, refer to the table below and make the appropriate paper settings in the printer driver, according to the type of paper that you have loaded. See Basic Print Operations for detailed information about paper settings, and see Paper for information about the number of sheets that can be set.
Paper Type
Printer Driver Paper Setting
Plain paper *1
60 to 63 g/m²
[Plain L]
64 to 89 g/m²
[Plain]
Heavy paper
90 to 163 g/m²
[Heavy]
[Heavy H] *2
Transparency *3 *4
[Transparency]
Labels *4
[Labels]
Envelope
[Envelope]
*1 Recycled paper can be used.
*2 If toner is not fully fixed and printouts are faded when you select [Heavy], select this instead.
*3 Use laser printer transparencies.
*4 Use A4 or Letter size only.
Do not use the following types of paper:
Wrinkled or creased paper
Curled or rolled paper
Torn paper
Damp paper
Very thin paper
Paper printed by a thermal transfer printer
Paper with a coarse texture
Glossy paper
Paper handling and storage
Store paper on a flat surface.
Keep paper wrapped in its original package to protect the paper from moisture or dryness.
Do not store paper in a way that may cause it to curl or fold.
Do not store paper vertically or stack too many packages of paper.
Do not store paper in direct sunlight, or in a place subject to high humidity, dryness, or drastic changes in temperature or humidity.
When printing on paper that has absorbed moisture
Steam may be emitted from the paper output area, or water droplets may form around the paper output area. This is not a malfunction. It occurs when the heat used to fix toner on the paper causes moisture in the paper to evaporate (most likely to occur at low room temperatures).
0HWJ-010