Configuring NetBIOS
To register this machine with a WINS server, a NetBIOS name and workgroup name must be set.
1
Start the Remote UI and log on in System Manager Mode. Starting the Remote UI
2
Click [Settings/Registration].
3
Click [Network Settings] 
[TCP/IP Settings].
[TCP/IP Settings].
4
Click [Edit] in [NetBIOS Settings].
5
Enter the required information.
[NetBIOS Name]
Enter up to 15 alphanumeric characters for the NetBIOS name of the machine.
Enter up to 15 alphanumeric characters for the NetBIOS name of the machine.
[Workgroup Name]
Enter up to 15 alphanumeric characters for the name of the workgroup that the machine belongs to.
Enter up to 15 alphanumeric characters for the name of the workgroup that the machine belongs to.
NetBIOS or workgroup names that start with an asterisk (*) cannot be registered with a WINS server.
6
Click [OK].
7
Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.