Disabling HTTP Communication
HTTP is used for communications over the network, such as when you access the machine via the Remote UI. If you are using a USB connection or you are not using HTTP, you can disable HTTP to block malicious third-party intrusions via the unused HTTP port.
|
|
|
If you disable HTTP communication, the following functions are automatically disabled.
Remote UI
IPP Print
WSD
Department ID Management PIN Confirmation Settings
|
1
Press 
(Settings).
(Settings).2
Use 
/ 
to select <Network>, and press 
.
/ to select <Network>, and press .When a message appears, press .
.3
Proceed with <TCP/IP Settings> 
<HTTP> in this order.
<HTTP> in this order.4
Select <Off>, and press .
.
 |
<Off>
Disables HTTP communication.
|
 |
<On>
Enables HTTP communication.
|
5
Perform a hard reset. Performing a Hard Reset
 |
The settings are enabled after the hard reset is performed.
|