Attention (Paper Drawer)

Before loading paper, see "Important Safety Instructions."

IMPORTANT
When loading paper for the first time after installing the paper feeder Before loading paper, be sure to turn ON the printer once. Do not touch the black rubber pad (A) in the paper drawer. This may result in paper being misfed. Do not pull out the paper drawer during printing. This may result in paper jams or damage to the printer. When using paper that is poorly cut Multiple sheets of paper may be fed at a time. In this case, fan the paper thoroughly, and then align the edges of the stack properly on a hard, flat surface.

IMPORTANT

When loading paper for the first time after installing the paper feeder

Before loading paper, be sure to turn ON the printer once.

Do not touch the black rubber pad (A) in the paper drawer.

This may result in paper being misfed.

Do not pull out the paper drawer during printing.

This may result in paper jams or damage to the printer.

When using paper that is poorly cut

Multiple sheets of paper may be fed at a time. In this case, fan the paper thoroughly, and then align the edges of the stack properly on a hard, flat surface.

NOTE

When loading A5 paper

The orientation setting to be selected on the control panel depends on how you load paper. Select the correct setting.

When loading paper in landscape orientation (when the long edges of the paper are parallel to the front side of the printer)

Select [A5R] for paper size.

When loading paper in portrait orientation (when the short edges of the paper are parallel to the front side of the printer)

Select [A5] for paper size.

For paper orientation and printing side, see "Paper Loading Orientation."

For settings displayed on the control panel, see "[Setup] Menu ([Paper Source] Options)" or "[Select Feeder] Menu."