Loading Paper in the Multi-purpose Tray

For details on the paper that you can load in the multi-purpose tray, see "Usable Paper."
Before loading paper, see "Attention (Multi-purpose Tray)."
1
Open the multi-purpose tray.
Holding the opening on the right side of the printer, open the multi-purpose tray.
2
Pull out the auxiliary tray.
3
When loading a long-size paper, open the tray extension.
4
Slide the paper guides a little wider than the actual paper width.
5
Gently load paper with the printing side face-down under the load limit guides (A) until it touches the back of the tray.
IMPORTANT
About the loading orientation of envelopes
See "Printing on Envelopes" and load envelopes in the correct orientation.
NOTE
When loading paper with a letterhead or logo
See "Paper Loading Orientation" and load the paper in the correct orientation.
6
Adjust the paper guides to the stack of paper so as to leave no space in between.
IMPORTANT
Be sure to adjust the paper guides to the stack of paper so as to leave no space in between.
If the paper guides are too loose or too tight, this may result in paper being misfed or paper jams.
Next, register the paper size
"Registering the Paper Size and Type"
07YS-03C