1-sided and 2-sided Printing

You can select whether to print on one side or both sides of each sheet of paper.

Paper Type	Paper Size
Plain paper (60 to 105 g/m²) Heavy paper (100 to 163 g/m²)	Standard size paper A4, B5, A5*, Legal, Letter, Executive, Foolscap and 16K Custom size paper: Short edges 148.0 to 215.9 mm, long edges 210.0 to 355.6 mm

*	The paper can be loaded only in landscape orientation (when the long edges of the paper are parallel to the front side of the printer).

Before performing 2-sided printing, see "Attention (1-sided Printing and 2-sided Printing)."

IMPORTANT

Precautions when performing 2-sided printing

Do not touch the paper during 2-sided printing until it is completely output. The paper is first partially output after the front side is printed, and then it is fed again to be printed on the back side.

Be sure to close the output selection cover before performing 2-sided printing.

"Paper Loading and Output"

Printing on the back side of paper whose front side is already printed

This printer enables you to perform 2-sided printing by manually inserting the back side of the paper* whose front side was previously printed even if the paper cannot be used for 2-sided printing.

When printing on the back side of paper whose front side was previously printed, flatten out any curled paper and load one sheet of paper at a time in the multi-purpose tray.

*	This is only for paper that has been printed using this printer. Also, you cannot print again on the same side of the paper that was printed before.
*	If you are using A5 paper, the back side may not be printed correctly.

Select [Print] from the [File] menu of the application.

Select your printer from [Printer] → [Finishing] → Select [1-sided Printing] or [2-sided Printing] from [Print Style].

NOTE
The default setting for [Print Style] is [2-sided printing]. You can save the 1-sided printing setting as a preset. For details, see "Using [Presets] for Printing."

Select the binding edge from [Binding Location].

The output image is displayed in the preview area.

If you want to set the gutter width, click [Gutter].

If you do not set the gutter width, skip to step 6.

Specify the gutter width → click [OK].

Click [Print].

NOTE
The screen may vary according to the operating system, as well as the type and version of the printer driver.