Data Is Reduced and Printed

Perform the following procedure.

<Cause> The setting for the scaling factor is not appropriate.

Solution 1
Perform the following procedure in the printer driver.
1.
Display the [Page Setup] tab.
2.
Clear the [Manual Scaling] check box.
If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size] and [Output Size] automatically.
Solution 2
Perform the following procedure in the printer driver.
1.
Display the [Page Setup] tab.
2.
Select the [Manual Scaling] check box, and then specify an appropriate scale factor according to the paper size to be used.
You can specify the same setting from the printer's control panel.
"[Setup] Menu ([PCL] Options)"
07YS-0LJ