Paper Source
|
(A): Multi-purpose tray
|
|
(B): Drawer 1
|
||
(C): Drawer 2 (optional)
|
||
(D): Drawer 3 (optional)
|
||
Output Tray
|
(E): Output tray
|
Outputs paper with the printed side facing down.
|
(F): Sub-output tray
|
Outputs paper with the printed side facing up.
The sub-output tray is suitable to print transparencies, labels, or envelopes which tend to curl, since the printed paper is output flattened.
|
When switching to the sub-output tray
|
|||||||||
(1)
|
Open the sub-output tray as shown in the figure.
|
(2)
|
Pull out the tray extension until it stops.
|
||||||
|
|
|
|
|
|||||
When switching to the output tray
|
|||||||||
(1)
|
Place the tray extension back into its original position as shown in the figure.
|
(2)
|
Close the sub-output tray.
|
||||||
See "Important Safety Instructions" also.
|
Paper Type
|
Paper Source
|
Output Tray*
|
|||
Multi-purpose tray
|
Drawer 1
|
Drawer 2, 3
(optional)
|
Output tray
|
Sub-output tray
|
|
Plain paper (75 g/m²)
|
Approx. 100 sheets
|
Approx. 500 sheets
|
Approx. 500 sheets
|
Approx. 250 sheets
|
Approx. 50 sheets
|
Heavy paper (91 g/m²)
|
Approx. 80 sheets
|
Approx. 400 sheets
|
Approx. 400 sheets
|
Approx. 100 sheets
|
Approx. 50 sheets
|
Heavy paper (128 g/m²)
|
Approx. 50 sheets
|
Approx. 40 sheets
|
Approx. 30 sheets
|
||
Transparency
|
Approx. 50 sheets
|
Approx. 10 sheets
|
|||
Label
|
Approx. 40 sheets
|
Approx. 60 sheets
|
Approx. 40 sheets
|
||
Index Card
|
Approx. 35 sheets
|
Approx. 35 sheets
|
|||
Envelope
|
Approx. 10 sheets
|
Approx. 10 sheets
|
*
|
Actual paper capacity varies depending on the installation environment, paper type or paper size to be used.
|