*1
|
[Communication Mode] and [Ethernet Type] are displayed when [Auto Detect] is set to [Off].
|
*2
|
[Communication Mode] appears only when [Ethernet Type] is set to a setting other than [1000 Base-T].
|
Pressing [ ] (Settings) displays the common Setup menu.
indicates that the procedure is performed by pressing [ ] or [ ] on the control panel.
indicates that the procedure is performed by pressing [OK] on the control panel. |
IMPORTANT
|
After performing the configurationTo enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see "Canceling All the Jobs (Hard Reset)." To go back up the hierarchyPress [ ] (Back).
About the control panelFor details on the control panel, see "Control Panel."
|
You can specify the settings when the printer is either online (the Online indicator is on) or offline (the Online indicator is off).
|
This printer can detect the communication method and Ethernet type automatically. Normally, set [Auto Detect] to [On].
If you want to fix the communication method and Ethernet type, set [Auto Detect] to [Off]. |
|
If you are using a hub, match the settings for the hub and the printer. For the settings of the hub you are using, consult your network administrator.
|
(1)
|
Select [Auto Detect] using [ ] and [ ], and then press [OK].
|
(2)
|
Select [On] using [ ] and [ ], and then press [OK].
|
(1)
|
Select [Auto Detect] using [ ] and [ ], and then press [OK].
|
||||
(2)
|
Select [Off] using [ ] and [ ], and then press [OK].
|
||||
(3)
|
Select [Communication Mode] using [ ] and [ ], and then press [OK].
|
||||
(4)
|
Select an Ethernet communication method appropriate for your network environment using [ ] and [ ], and then press [OK].
|
||||
(5)
|
Select [Ethernet Type] using [ ] and [ ], and then press [OK].
|
||||
(6)
|
Select an Ethernet type appropriate for your network environment using [ ] and [ ], and then press [OK].
|
NOTE
|
For details on a hard reset |