[Setup] Menu ([PDF] Options)

NOTE
Table description
Bold values in the table indicate the default settings.
Setting Item
Setting Value
Setting
[Fit to Page]
[Off], [On]
Set it to enlarge or reduce to fit the effective print area of the specified paper.
This setting fixes the aspect ratio and scales the page size of the PDF file.
[Enlarged Print Area]
[Off], [On]
Set whether to expand the effective print area to the edges of the paper without leaving margins around the edges of the paper.
When it is set to [On], images on the edges of the paper may be partially cut off.
[N on 1]
[Off], [2 on 1], [4 on 1], [6 on 1], [8 on 1], [9 on 1], [16 on 1]
You can print multiple pages of the PDF file data arranged on one page. When multiple pages are printed, they are arranged from the top left.
[Comment Print]
[Off], [Auto]
Specify whether to print the comments inside the PDF file that are specified for printing.
[Halftones]
[Text]: [Resolution],
[Gradation], [High Resolution]
[Graphics]: [Resolution],
[Gradation], [High Resolution]
[Image]: [Resolution],
[Gradation], [High Resolution]
You can select the halftone display method from
[Resolution], [Gradation] and [High Resolution].
[Resolution] allows you to perform printing that combines smooth gradation with edge quality. It is suitable for printing graphics or graphs that use gradation.
[Gradation] allows you to print with a sharp gradation and well-balanced texture, contrasting light and shade, which is best suited for printing photo images.
[High Resolution] allows you to print in fine detail so that the edges of text data can be seen clearly. It is suitable for printing data containing text and fine lines.
[Grayscale Conversion]
[sRGB], [NTSC], [Uniform RGB]
Select the method for converting color print data to
grayscale for printing.
When it is set to [sRGB], it calculates the grayscale value using the sRGB standard color conversion method.
When it is set to [NTSC], it calculates the grayscale value using the NTSC standard color conversion method.
When it is set to [Uniform RGB], it takes the average value of the Red, Green and Blue color values as the grayscale value.
[Dot Gain Adjustment]
[-10%], [-5%], [Standard],
[+5%], [+10%]
You can adjust dotted areas to change darkness and lightness of painted areas. A higher number specifies a darker printed area.
0987-0AW