Registering Default Paper Settings for the Manual Feed Slot
You can register default paper settings for the manual feed slot. Registering default settings can save yourself the effort of having to specify the settings each time you load the same paper into the manual feed slot.
|
NOTE
|
|
After the default paper setting is registered, the paper setting screen is not displayed when paper is loaded, and the same setting is always used. If you load a different paper size or type without changing the paper settings, the machine may not print properly. To avoid this problem, disable the default setting by selecting <Off> in step 3, and then load the paper.
|
1
Press 
(Select Paper/Settings).
(Select Paper/Settings).If the <Select Paper> screen shown below is displayed, use 
/
to select <Paper Settings>, and press 
.
/ to select <Paper Settings>, and press .
2
Select <Multi-Purpose Tray>, and press .
.
3
Select <Set Details>, and press .
.If <Set Details> cannot be selected, select <On>, press , and then perform steps 1 and 2 again.
, and then perform steps 1 and 2 again.
4
Select the paper size, and press .
.
Registering a custom paper size
|
1
|
Select <Custom>, and press
. |
|
2
|
Specify the length of the <X> (shorter) side.
Select <X>, and press
.Input the length of the <X> side using
/ or the numeric keys, and press <Apply>. |
|
3
|
Specify the length of the <Y> (longer) side.
Select <Y>, and press
.Input the length of the <Y> side, and press <Apply>.
 |
|
4
|
Press <Apply>.
 |
5
Select the paper type, and press .
.