Setting Up Print Server

With a print server, you can reduce the load on the computer that you print from. The print server also enables each computer to install MF Drivers over the network, which saves you the trouble of installing the drivers on each computer by using the CD-ROM. To set up a computer on the network as a print server, configure the settings for sharing the printer.
IMPORTANT
To perform the following procedure, log on to your computer with an administrator account.
You may be unable to install drivers over the network depending on the operating system and the bit architecture (32-bit or 64-bit) of the print server and client computers.
When implementing a print server in a domain environment, consult your Network Administrator.
NOTE
Using Department ID Management with a print server
Canon Driver Information Assist Service must be added during the printer driver installation.
1
Open the printer folder. Displaying the Printer Folder
2
Right-click your printer icon and click [Printer properties] (or [Properties]).
3
Click the [Sharing] tab, select [Share this printer], and enter the share name of the machine.
NOTE:
When [Change Sharing Options] is displayed
Click [Change Sharing Options]. If the [User Account Control] dialog box appears, click [Yes] (or [Continue]).
4
Install additional drivers as necessary.
This operation is required if you want to install MF Drivers in other computers running a different bit architecture via the print server.
5
Click [OK].

Installing MF Drivers on a Computer via the Print Server

0AU5-088