1
|
Click [Edit...] in [Multicast Discovery Settings].
|
2
|
Select the [Respond to Discovery] check box and specify the required settings.
[Respond to Discovery]
Select the check box to set the machine to respond to imageWARE multicast discovery packets and enable monitoring by imageWARE. [Scope Name]
To include the machine into a specific scope, enter up to 32 characters for the scope name. |
3
|
Click [OK].
|
1
|
Click [Edit...] in [Sleep Mode Notification Settings].
|
2
|
Select the [Notify] check box and specify the required settings.
[Notify]
Select the check box to notify imageWARE of the power status of the machine. When [Notify] is selected, you can expect the machine to avoid unnecessary communication during sleep mode and reduce the total power consumption. [Port Number]
Change the port number for this function according to the network environment. [Number of Routers to Traverse]
Specify how many routers the notification packets can pass. Enter a number from 0 to 254. [Notification Interval]
Specify how often the machine notifies imageWARE of its power status. Enter a number in seconds from 60 to 65535. |
3
|
Click [OK].
|