Connecting via USB
Install the software, and then use a USB cable to connect the machine to the computer.
1
Install the software.
2
Remove the cap that covers the USB port on the back side of the machine.
Pull the string to remove the cap.
3
Connect the USB cable.
Connect the flat end (
) to the USB port on the computer.
Connect the square end (
) to the USB port on the machine.
NOTE:
If the dialog box prompting you to install the software is displayed, disconnect the USB cable from the computer, click [Cancel], and then start from step 1 again.
»
»
If you are using MF8210Cn, the settings for connecting to a computer are complete.