Preparing to Use the Machine as a Scanner
Make sure that the machine and your computer are connected and all software is installed (Connecting to a Computer). To connect via a wireless or wired LAN, you must register this machine in MF Network Scan Utility. Register by following the procedure below. This procedure is not required if the machine and your computer are connected via USB.
|
IMPORTANT
|
|
The scan function is not available if the machine and your computer are connected in an IPv6 environment. Use IPv4 or a USB connection.
|
1
Click 
in the system tray.
in the system tray.
2
Select the check box for the machine, and click [OK].
Up to ten scanners on a network can be registered on a computer.