1
|
Select <Subject/Message>, and press .
|
2
|
Select <Subject>, and press .
|
3
|
Enter the subject using the numeric keys, and press <Apply>.
Pressing <A/a/12> toggles the input modes.
|
4
|
Select <Message>, and press .
|
5
|
Enter the body using the numeric keys, and press <Apply>.
Pressing <A/a/12> toggles the input modes.
|
6
|
Press <Apply>.
|
1
|
Select <Reply To>, and press .
|
2
|
Select <Specify from Address Book>, and press .
|
3
|
Select a reply-to address from the Address Book, and press .
For instructions on how to use the Address Book, see Specifying from Address Book.
|
1
|
Select <Priority>, and press .
|
2
|
Select a priority level, and press .
|
1
|
If there are additional pages of documents to be scanned, place the next document on the platen glass, and press .
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
|
2
|
Press <Start Sending>.
The e-mail is sent.
|
TIPS
|
If you always want to scan with the same settings:
If you want to specify the e-mail sender name:
|