Feeder

You should use the feeder when you want to copy several originals at the same time. Place the originals into the feeder and press

(Start). The machine automatically feeds the originals to the platen glass and scans them. Two-sided originals can also be automatically turned over and scanned as two-sided documents.

The following types of originals can be loaded in the feeder:

Weight: 13 to 34 lb bond (50 to 128 g/m2)

Original size: 11" x 17", LGL, LTR, LTRR, STMT, and STMTR

Tray Capacity: 100 sheets of paper (21 lb bond (80 g/m2))

IMPORTANT
Thin originals may become creased, if used in a high temperature or high humidity environment. If you scan long originals, whose width is 17" to 24 7/8" (432 mm to 630 mm), support originals by hand when feeding and outputting paper. Do not place the following types of originals into the feeder: Originals with tears, five or more binding holes, or cutouts Severely curled originals or originals with sharp folds Wrinkled originals Stapled originals or originals with paper clips Tabbed originals Originals with adhesive tape or glue Originals that are taped together Carbon backed paper or other originals which may not feed smoothly Transparencies and other highly transparent originals Always smooth out any folds in your originals before placing them into the feeder. If the original is folded, an error screen may be displayed because the original size cannot be detected correctly.

IMPORTANT

Thin originals may become creased, if used in a high temperature or high humidity environment.

If you scan long originals, whose width is 17" to 24 7/8" (432 mm to 630 mm), support originals by hand when feeding and outputting paper.

Do not place the following types of originals into the feeder:

Originals with tears, five or more binding holes, or cutouts

Severely curled originals or originals with sharp folds

Wrinkled originals

Stapled originals or originals with paper clips

Tabbed originals

Originals with adhesive tape or glue

Originals that are taped together

Carbon backed paper or other originals which may not feed smoothly

Transparencies and other highly transparent originals

Always smooth out any folds in your originals before placing them into the feeder. If the original is folded, an error screen may be displayed because the original size cannot be detected correctly.

Adjust the slide guides to fit the size of your originals.

Neatly place your originals with the side to be copied face up into the original supply tray.

Place your originals as far into the feeder as they will go, until the Original Set Indicator is lit.

* Original Set Indicator

If any dirt on the document feed scanning area is detected when the originals are placed in the feeder, the screen prompting you to clean the scanning area appears. Even though streaks may appear on the copies, you can continue to scan your documents by pressing [Close]. For instructions on cleaning the document feed scanning area, see "Originals Loaded in the Feeder and Prints Become Dirty (Manual Feeder Cleaning)."

CAUTION
Do not insert your hands in the gap in the original supply tray, as doing so may cause injury.

IMPORTANT
Do not drop clips or other objects into the gap in the original supply tray. Do not add or remove originals while they are being scanned. When scanning is complete, remove the originals from the original output area to avoid paper jams. (When you use the feeder, the Original Output Indicator blinks for a certain time when scanning is complete.) Do not place items in the original output area, as doing so may cause damage to your originals.

IMPORTANT

Do not drop clips or other objects into the gap in the original supply tray.

Do not add or remove originals while they are being scanned.

When scanning is complete, remove the originals from the original output area to avoid paper jams. (When you use the feeder, the Original Output Indicator blinks for a certain time when scanning is complete.)

Do not place items in the original output area, as doing so may cause damage to your originals.

NOTE
When you are enlarging a LTR or STMT original onto 11" x 17" or LGL paper, place the original horizontally. The scanned originals are output to the original output area in the order they are fed into the feeder. You can place different size originals together into the feeder if you set the Different Size Originals mode. For more information, see the following: Different Size Originals for Copy Different Size Originals for Scan and Store Different Size Originals for Scan and Send Different Size Originals for Fax Settings

NOTE

When you are enlarging a LTR or STMT original onto 11" x 17" or LGL paper, place the original horizontally.

The scanned originals are output to the original output area in the order they are fed into the feeder.

You can place different size originals together into the feeder if you set the Different Size Originals mode. For more information, see the following:

Different Size Originals for Copy

Different Size Originals for Scan and Store

Different Size Originals for Scan and Send

Different Size Originals for Fax Settings

IMPORTANT
Limit repeated feeding to a maximum of 30 times (this number varies, depending on the type and quality of the original). If the same original is fed through the feeder repeatedly, the original may fold or become creased, and make feeding impossible. If the feed rollers are dirty from scanning originals written in pencil, perform the feeder cleaning procedure. (See "Originals Loaded in the Feeder and Prints Become Dirty (Manual Feeder Cleaning).")

IMPORTANT

Limit repeated feeding to a maximum of 30 times (this number varies, depending on the type and quality of the original). If the same original is fed through the feeder repeatedly, the original may fold or become creased, and make feeding impossible.

If the feed rollers are dirty from scanning originals written in pencil, perform the feeder cleaning procedure. (See "Originals Loaded in the Feeder and Prints Become Dirty (Manual Feeder Cleaning).")