Scanned Originals Become Dirty (Automatic Feeder Cleaning)
If your originals have black streaks or appear dirty after scanning them through the feeder, perform an automatic feeder cleaning for the rollers of the feeder.
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Maintenance] → [Clean Feeder].
3.
Place 10 sheets of blank paper into the feeder → press [Start].
It takes approximately 20 seconds to clean the feeder.
Fan the stack of paper well before loading it.
Use normal LTR size paper.
When cleaning is complete, try scanning again.
|
NOTE
|
|
Feeder cleaning cannot be performed while printing.
To cancel feeder cleaning while it is in progress, press [Cancel].
|