Replacing the Staple Case (Inner Finisher-G1)
This section describes how to replace the staple case and staple cartridge in the stapler unit. When the Inner Finisher-G1 is almost out of staples and the staple case must be replaced, a screen prompting you to replace the staple case appears on the touch panel display. Follow the procedure described below to replace the staple case.
|
NOTE
|
|
The Inner Finisher-G1 is an optional product.
We recommend that you order staple cases from your local authorized Canon dealer before your stock runs out.
Use only staple cases intended for use with this machine.
|
1.
Open the front cover of the finisher.
2.
Pull out the staple cartridge from the finisher.
 |
1. Push down the green part to unlock the staple cartridge. |
2. Push up the staple cartridge slightly and pull it out. |
3.
Pull out the empty staple case from the staple cartridge.
4.
Remove the new staple case from its box.
5.
Insert a new staple case into the staple cartridge.
|
IMPORTANT
|
|
Only one staple case can be inserted at a time.
|
6.
Push the staple cartridge into the finisher until it clicks into place.
7.
Close the front cover of the finisher.
 CAUTION |
|
When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury.
|
|
NOTE
|
|
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples.
|