Making the Colour More Vivid When Printing with Full Colour

You can set the colour to be more vivid when copying/printing stored files. You can set a default value for all jobs, rather than setting the colour for each job separately.

NOTE
This mode is enabled if you select [Full Color] in [Select Color] for the Copy or Access Stored Files function, or if the machine detects that the original is in full colour when [Auto (Color/B&W)] is selected.

Press

(Settings/Registration).

[Adjustment/Maintenance] → [Adjust Image Quality] → [Full Color Printing Vividness Settings].

Select the level of vividness → press [OK].

Details of each item are shown below:

[Standard]: Reproduces the colours of the original.

[Level 1]: Uses colour more vivid than [Standard].

[Level 2]: Uses colour more vivid than [Level 1].

NOTE
Settings specified from the control panel become effective after the machine is restarted, after the procedure. If <Perform Apply Setting Changes from Settings/Regist.> is displayed on the bottom of the touch panel display, you can press [Apply Set. Chng.] in (Settings/Registration) to restart the machine. For information on restarting the machine using the main power switch, see "How to Turn On the Main Power."

NOTE

Settings specified from the control panel become effective after the machine is restarted, after the procedure. If <Perform Apply Setting Changes from Settings/Regist.> is displayed on the bottom of the touch panel display, you can press [Apply Set. Chng.] in

(Settings/Registration) to restart the machine. For information on restarting the machine using the main power switch, see "How to Turn On the Main Power."