Starting the Setup Guide
You can configure the machine's initial settings by using the Setup Guide.
|
NOTE
|
|
When the Setup Guide is started and closed, the machine will restart. Before the machine is restarted, make sure that there are no jobs currently in progress.
This mode is not available if DepartmentID Authentication is enabled.
|
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Management Settings] → [License/Other] → [Start Setup Guide].
3.
Press [Start].
Press [Start] to restart the machine and display the Setup Guide.
Once all the settings have been configured with the Setup Guide, the machine will once again restart.
The Setup Guide displays the settings to be configured in the following order.
|
Procedure
|
Item
|
Setting Description
|
Remarks
|
Required Permission Level
|
|
1
|
<Switch Language/Keyboard>
|
Select the displayed language and keyboard layout.
|
General Users/System Managers
|
|
|
2
|
<Paper Settings>
|
Set the paper size for each paper drawer.
|
You can close the Setup Guide here. To close the Setup Guide, press [Skip].
|
|
|
3
|
<Use Optional Output Tray>
|
Set whether to use the optional output tray.
|
The Log In screen is displayed. Log in as an administrator.
|
System Manager
|
|
4
|
<Date/Time Settings>
|
Set the date and time.
|
||
|
5
|
<Use IP Address>
|
Specify IPv4 and/or IPv6, and each IP address.
|
||
|
6
|
<DNS Server Address Settings>
|
Configure the DNS Server Address Settings, the DNS Host/Domain Name Settings, and the DNS Dynamic Update Settings.
|
||
|
7
|
<Proxy Settings>
|
Specify the Proxy Settings.
|
||
|
8
|
<Register Unit Telephone Number>
|
Set the phone number, the name the machine will appear as on the network, and the line type.
|
||
|
9
|
<Auto Adjust Gradation>
|
Automatically adjust the gradation, density, and colour settings of the machine.
|
||
|
10
|
<Output Report>
|
If necessary, output reports for the network user data list, fax user data list, and setting value list.
|