Retrieving Audit Logs

If you set this mode to 'On', you can generate the following logs. You can manage (export/clear) the generated logs using the Remote UI.

Network Connection Log

Machine Management Log

Inbox Document Operation Log

Inbox Authentication Log

IMPORTANT
For more information on the method for managing audit logs, see "Audit Log Management."

Press

(Settings/Registration).

Press [Management Settings] → [Device Management] → [Save Audit Log].

Press [On] → [OK].

Select [Off] if you do not want to retrieve audit logs.

IMPORTANT
If you set this mode to 'On', [Adjust Time] is grayed out and both administrators and general users are unable to edit this setting to maintain the reliability of the date recorded on the audit log. (See "Current Time Adjustment.")

NOTE
Settings specified from the control panel become effective after the machine is restarted, after the procedure. If <Perform Apply Setting Changes from Settings/Regist.> is displayed on the bottom of the touch panel display, you can press [Apply Set. Chng.] in (Settings/Registration) to restart the machine. For information on restarting the machine using the main power switch, see "Main Power and Energy Saver Key."

NOTE

Settings specified from the control panel become effective after the machine is restarted, after the procedure. If <Perform Apply Setting Changes from Settings/Regist.> is displayed on the bottom of the touch panel display, you can press [Apply Set. Chng.] in

(Settings/Registration) to restart the machine. For information on restarting the machine using the main power switch, see "Main Power and Energy Saver Key."