Inner 2way Tray-J1

If the Inner 2way Tray-J1 is attached to the machine, prints can be delivered to both the main tray and the Inner 2way Tray-J1. Additionally, if the Copy Tray-J2 is attached to the right side of the machine, prints can be delivered to three different locations.
When the Inner 2way Tray-J1 is attached to the machine, the following modes are available:

Collate Mode

The prints are automatically collated into sets arranged in page order.

Group Mode

All prints of the same original page are grouped together into sets.

Rotate Mode

If originals of the same size are printed, the prints are automatically collated into sets arranged in page order.

Parts and Their Functions

1.
Inner Tray
Paper is output to the output tray.
2.
Output Paper Tray Guide
Tilt up the output paper tray guide to catch the printouts.
3.
Main Unit's Right Cover
Open this cover when clearing a paper jam inside the main unit.
The paper sizes that can be output from the output trays of the machine are indicated below. However, some paper sizes may not be output depending on the set functions.
: Available
-: Unavailable
Paper Size
Tray A/B
A3
A4
A4R
A5
A5R
Envelope
No. 10 (COM10)
Monarch
DL
ISO-C5
Nagagata 3
Yougatanaga 3
Kakugata 2
Custom Size
98.4 mm x 139.7 mm to 320 mm x 457.2 mm
Free Size
98.4 mm x 139.7 mm to 320 mm x 457.2 mm

IMPORTANT
If the Inner 2way Tray-J1 is attached, a finisher cannot be attached.
The 3 Way Unit-D1 is required to attach the Inner 2way Tray-J1 to the imageRUNNER ADVANCE C3320.
12HC-051